I CAME ACROSS A LITTLE PROBLEM IN DOING A SIX POINT TARGET ALIGNMENT,
THIS IS WHERE DATUM A ( PLANE ), DATUM B ( LINE ) AND DATUM C ( POINT ) ARE NOT IN THE
STANDARD ALIGNMENT TO THE MACHINE AXIS.. ( REF. BOEING 6 POINT ALIGNMENT ) . I TRY AND TRY BUT SEEM I CAN NOT GET IT TO WORK CORRECTLY ( LOOP BACK AROUND ).....THIS HAS BECOME A REAL PROBLEM FOR ME.....THE DIMINSIONS ARE AS FOLLOW.

TARGET POINTS:
A1 X= 4.733 Y= -4.581 Z= -3.114
A2 X= 9.718 Y= -13.107 Z= -7.355
A3 X= 13.871 Y= -23.392 Z= -12.670

B1 X= -4.879 Y= -3.983 Z= -3.903
B2 X= -14.1331 Y= -22.449 Z= -13.310

C1 X= 2.991 Y= -1.065 Z= -2.019

IF YOU CAN HELP OR GUIDED ME TO GET THIS IN....IT WOULD EASE ARE MIND...............

THANKS

URBAN & CMM GROUP