The CMM Forum Table of Contents
- Administrator Messages
- Axila
- Brown & Sharpe
- Coord3
- DEA
- DIS
- DMIS
- DMIS Question and Answer
- FARO
- For Sale
- G. D. & T.
- Helmel
- IMS
- ISO 9000
- Job Opportunities
- Leitz
- LK
- Windows 95 (Deleted User)
- CAMIO: CATIA to IGES translations? (Deleted User)
- Parallelism check using Wincmes (Troy Braman)
- moving an lk g80-c (Jorge Montes)
- Interested in buying! (Deleted User)
- LK-DMIS and Brown&Sharpe Xcel (Deleted User)
- HELP ME ! I NEED INFORMATION ! (Deleted User)
- Parallel between lines (Deleted User)
- tp200 straight in scanning or scanning in xz axis (Deleted User)
- 360 degree scanning (Deleted User)
- bad character (Deleted User)
- Short moves while calibrating probe (Deleted User)
- Dmis output (Deleted User)
- Circular Runout on a CMM (Deleted User)
- INTERACTIVE GRAPHICS (Deleted User)
- two rotary tables and WINCMES 32? (Deleted User)
- Error 354 - Z-axis error (Deleted User)
- Auto move to Machine Zero (Deleted User)
- CMES AF,P3 question (Jorge Montes)
- Using OUTPUT without a tolerance (Deleted User)
- Visual Basic\32bit WINCMES\16bit (Troy Braman)
- SNSDEF/NONE not worling correctly (Deleted User)
- Report Archiving in Visual CMES (Steve Horsfall)
- From Vax to PC... what to expect? (Joe Corrado)
- Visual CMES Problems (Ray Admire)
- Dove Tail Alignment Help (Deleted User)
- Ascii files from HP9816/9836/310 (Deleted User)
- CMES crash with 4 pts to AF,P1 (Deleted User)
- Manual Moves in the X Axis (Ray Admire)
- .020' Radius (Deleted User)
- g80-c z axis drive roller (Jorge Montes)
- CMES and DCL (Joe Corrado)
- CAMIO: help with alignment (Deleted User)
- 32 Bit Wincmes (Troy Braman)
- IN-QUESTION OF ANGULARITY (Deleted User)
- LK surf wireframes (Jim Jewell)
- Lk Surf users (Jim Jewell)
- Camio mirroring ? (Jim Jewell)
- visual cms (Jorge Montes)
- DIGI-GRAPH (Deleted User)
- wincmes 32 bit #ph (Jorge Montes)
- input window,dos window (Jorge Montes)
- True Position Calc. while using RMEAS (Deleted User)
- Calculating in WINCMES (Troy Braman)
- ball bar (Erv) (Jorge Montes)
- printing from Dos (Jorge Montes)
- Cylinder measurement (Deleted User)
- Adding points to Camio (Deleted User)
- Controlling retract in tight places (Deleted User)
- Tip Change (Deleted User)
- Measuring a radius (Deleted User)
- #ML Command (Ray Admire)
- Using ID,ZM command (Ray Admire)
- parallelism between planes (Deleted User)
- Wincmes\Visual Basic\Delphi (Troy Braman)
- CONSTRUCTION OF INTERSECTION BETWEEN A CIRCLE AND A LINE (Deleted User)
- OUTPUTTING FORM(STRAIGHTNESS) OF AN AXIS (Jorge Montes)
- MIRROR IMAGE (Jorge Montes)
- star probe requalification (Jorge Montes)
- POLAR Points in LK-DMIS (Deleted User)
- Lk-Dmis and Camio (Deleted User)
- Illegal touches (Deleted User)
- PH-10 & 9 with TP-200 Touch Probe (Ray Admire)
- Slowww machine (Deleted User)
- Obtain a varible from an Ordinal (Paul Frevele)
- Securing CMM Computers on the Shop Floor (Doug Jimison)
- Job Opportunity - Application Engineer (Deleted User)
- Reset Scales Problems (Deleted User)
- Accessing results file (Deleted User)
- Model commands in LKDMIS (Deleted User)
- FREE CNC SOFTWARE (Deleted User)
- LK-DMIS on Manual Machine (Deleted User)
- Best Fits (Deleted User)
- Extracting Tip Radius (Deleted User)
- Mirroring files and Variables (Deleted User)
- Machine Configurations: LK-DMIS (Deleted User)
- Trouble with primary plane. (Deleted User)
- Camio - loading more tolerances (Deleted User)
- portable cmm! Know anything? student needing help! (Deleted User)
- Requals going out of calibration for no reason (Deleted User)
- Outputting the .res file into an excel worksheet (Terry Prather)
- DMIS 5.11 lkdmis.cfg (Paul Frevele)
- SLOT MEASUREMENT (Deleted User)
- Slot programming in Camio 2.11 (Deleted User)
- Converting PC DMIS to LK DMIS and vice versa (Terry Prather)
- DigiGraph (Deleted User)
- READ COMM ERROR IN VISUAL & WINCMES (Deleted User)
- CAMIO-INPUT FROM ACAD14 (Deleted User)
- Printing In WinCMES (Ray Admire)
- LKDMIS-a better way.....(?) (Deleted User)
- Shop floor CMM (Deleted User)
- Vector lines - Camio points. (Ron Idoine)
- Projected perpendicularity (Deleted User)
- HPGL files output in Wincmes (Deleted User)
- Penplotter in Wincmes (Deleted User)
- Auto OD Command (Jorge Montes)
- Thread inserts (Duncan Mackenzie)
- 'C:/lk/lkdmis32' instead of 'C:/windows' (Terry Prather)
- Error recovery (Deleted User)
- High level examples. (Deleted User)
- RESONANCE (Deleted User)
- Importing xyz ijk values (Russell Schmidt)
- Translate UMESS UX to DMIS (Russell Schmidt)
- LK produced CD-R's (Duncan Mackenzie)
- Network Connections (Ray Admire)
- SPC with NWA and Visual CMES Problem (Deleted User)
- Help on Manual CMM using Table Rotation (Deleted User)
- Random pauses in LK-DMIS (Keith Morton)
- Dual Column Accuracy (Deleted User)
- CAMIO graphical Reporting (Deleted User)
- probe calibration (Bob Fitzreiter)
- CONSTRUCTION ERRORS (Bob Fitzreiter)
- Constructing a circle from pts. (Deleted User)
- Qualifications In Visual CMES (Ray Admire)
- Jumping ship (Scott Evans)
- B89 point to point measurement (Bob Fitzreiter)
- constructing a circle from pts. (Andrew Mills)
- Novell network & LK (Deleted User)
- LK Users Group Meeting (Terry Prather)
- IMTS (Josh Farmer)
- TP200 module magnetism (Terry Prather)
- Creating a circle within a cone (Ben Eng)
- Camio - Multi-piece reporting (Deleted User)
- No Topic (Jorge Montes)
- List wanted: Where are L.K.'s in western states (Deleted User)
- LK MICRO 4 TWIN (Deleted User)
- Dmis Variables (Arie Tsur)
- non-contact CMMs (Deleted User)
- 6 point Locate (Deleted User)
- 3-2-1 Align. inverted (Deleted User)
- LKDMIS upgrade 5.2.2 (Bob Fitzreiter)
- Dongle problems (Deleted User)
- LK - Service & Support (Deleted User)
- Pro_E&Scan Tools LK G-90C CMM? (Deleted User)
- CMM Forum web server (Duncan Mackenzie)
- Sample file for LK-DMIS (JAVID MALEK)
- probe/probe resets help needed (Jeffrey Harned)
- LK Dmis using bmp's pics in there program (Bill Rogers)
- Auto probe change (Hardeep Choudhry)
- Very Simple High Level Question (Deleted User)
- High Level (JOHN SOTIROPOULOS)
- Printing in LK APPS (Ray Admire)
- Changing signs on position value (Jeffrey Harned)
- Info on Renishaw cartridges (Bill Rogers)
- How do you get into MS-DOS? (JOHN STEWART)
- Volumetic Calibration (Bill Rogers)
- calibration (Deleted User)
- calibration (Deleted User)
- LK-DMIS RELEASE NOTES FOR 5.2 (JOHN STEWART)
- Printer problems (Bill Rogers)
- CMM performance (Kern Pressel)
- High Level Menu (Fariq Sadzam)
- PRINTER FORMATING (Jeffrey Harned)
- Printing outputs/reports on next page (Richard Criswell)
- Engine Blocks on CMMs (Richard Criswell)
- Rotab is Drifting (Ted Wieclaw)
- Moving alignment to a Slot (Hardeep Choudhry)
- Surface Plate Insert Repair (Jim Hall)
- No Topic (Paul Frevele)
- Help! WinCMES to DMIS (CK Lim)
- Free CMM Calibration (CK Lim)
- Error message (Wallace LS)
- Using more htan one tool to construct a plane (William Messer)
- About the history of CMM (Takis Kavvadias)
- CMES to DMIS (Ray Admire)
- Visual Cmes: Prompt picture too small (Uri Inbar)
- Converting AXES alignments from igs file to machine. (Tim Holcomb)
- Computer locks up. (Steve Grosmick)
- Alignment of two points... (Richard Criswell)
- high point extraction from a scan (Surinder Parkash)
- 6 POINT ALIGNMENT (Bob Fitzreiter)
- THIS IS A TEST (JACK CHEN)
- help: lk-dmis edge command (JACK CHEN)
- help: lk-dmis edge command (JACK CHEN)
- help: lk-dmis edge command (JACK CHEN)
- Ballooning a Part (Mark Bradford)
- Users Group (Mark Bailis)
- Axial / normal to surface measurment (Jeffrey Harned)
- CIM STATION (DANIEL UTZ)
- Automatic report save to Access (Uri Inbar)
- CMM Literature (Josh Farmer)
- How to create DMIS program from LK CAMIO (Al Schives)
- HP,Z or LP,Z (Jeffrey Harned)
- SPC Software.... (Richard Criswell)
- SDRC import (Richard Criswell)
- Output format for true position (Viktor Sokurov)
- Inspection Job Opportunity (Bill Briley)
- Plane creation from 4 pts. (Richard Nicholls)
- Speed problems w/ G80C (Chad Dumas)
- from Brown&Sharpe DMIS to LKDMIS (Ed Pastore)
- LK CMM Programmer/Operator (Matthew Maurer)
- controller replacement (Chad Dumas)
- how to measure inner cone with camio on model (Viktor Sokurov)
- HLL statements (Terry Prather)
- WinCmes and WinNT (Mark Bailis)
- form of calculated pcds/diameters (Andrew Email: rattysoft@yahoo.co.uk)
- cone - sphere intersect issue (Viktor Sokurov)
- Offline programming, LKDMIS and Camio (Stefan Lofgren)
- Decimal Degrees to DMS (Mark Bailis)
- Access Violations in LK DMIS 5.3 (Dave Hancock)
- CMM Software Verification (Rich Rochester)
- Decimal Degrees to DEG,MIN,SEC (Arie Tsur)
- OPERATOR INPUT (Richard Nicholls)
- Concentricity (Vicki Havard)
- recovering windows lk files (Tom Breen)
- CMM Calibration (Vicki Havard)
- CMM Calibration (John Ruys)
- CMM calibration (John Ruys)
- CMM Calibration (John Ruys)
- CMM Calibration (John Ruys)
- Modular Programming DMIS 5.11 xtern exfil buttons (Fariq Sadzam)
- LK-DMIS Hanging up! (Ray Admire)
- Display Metal Condition (Richard Nicholls)
- Dgraf (Mark Bailis)
- Display Metal Condition (Richard Nicholls)
- Alignment HELP! (Deleted User)
- plane result in degrees. (Fariq Sadzam)
- Help: I'm new to Visual Cmes (Kevin Blackburn)
- 'y axis' output. (Keith Morton)
- HELP.... (Phil Ault)
- MCR20 Changer (Mark McCulley)
- High Level Code (Jeff Smith)
- Alignment help again (Deleted User)
- Computer Upgrade (Dale Cuppett)
- web page (Jeff Smith)
- Calculating Profile (Bill Rogers)
- Happy Customer :-) (Viktor Sokurov)
- DIGIGRAPH to DMIS (Richard Nicholls)
- Current Unit Status (David Kreifels)
- Sensor Definitions 'Line Execution' (Brian Wise)
- Digitising/Scanning/Reverse Engineering in LK-CAMIO (Raghav K.S.V.)
- CMM Justification (Bill Rogers)
- Catia Translation lockups (Hope Valentine)
- Model inspection problems (Bill Rogers)
- Probe Point Density (Mark Conley)
- Need CMES training (Dennis Linke)
- Scanning (Vicki Havard)
- GCurve Scan (David Kreifels)
- Locate 3 Point Alignment (David Kreifels)
- Date & Time (Jason Levine)
- Des entities in Camio 5.22 (Mark Jackson)
- Obtain Act Angle in LK (Mark Powell)
- LKWINCMES (Tamir Benisti)
- HC90 (Greg Eller)
- jeff freze (Greg Eller)
- Angular Measurement in CMES v9 (Kevin Blackburn)
- Renaming Reports in Visual Cmes (Kevin Blackburn)
- TP200 service life (Jeffrey Harned)
- tp200 5 star probe calibration (Bill Rogers)
- User input/output to report file (Jeffrey Harned)
- How to rotate the ref. system using X, Y values in LK-DMIS 5.3 (Viktor Sokurov)
- LK-DMIS 5.3 crashes (Viktor Sokurov)
- Calibration Program for DMIS 5.3 (Viktor Sokurov)
- Point Projecttion (Scott Awalt)
- HELP: Error when reading commands (Kevin Blackburn)
- New CMM Support option. (Steve Horsfall)
- Squareness / Perpendicularity reporting (Jeffrey Harned)
- Using the header information.... (Richard Criswell)
- TOL/PROFS (Dale Cuppett)
- Visual CMES - Reporting points in Polar (Kevin Blackburn)
- Parameter Variables (David Kreifels)
- Circle algorithms (Jason Levine)
- Win CMES (Paul Frevele)
- fixture alignment problem (SURINDER PARKASH)
- LK User group meeting (Bill Rogers)
- Apollo CMM Probe. (SURINDER PARKASH)
- Setting Machine Speeds? (James McCafferty)
- Felt tip marker. (James McCafferty)
- Change X,Y,Z to T,B,H or L,W,H (James McCafferty)
- Change X,Y,Z to T,B,H or L,W,H (Bill Rogers)
- Change X,Y,Z to T,B,H or L,W,H (Ray Admire)
- Getting Info from edge point surface hit? (James McCafferty)
- Offline woe's (Joel Campbell)
- Windows XP compatibility (Mark Sly)
- Radial True Position (Terry Phillips)
- Read Head Lights (James McCafferty)
- Stop program with HIGH LEVEL (James McCafferty)
- #RQ,5 (Leonard Malmstrom)
- Turbine Blade Inspection (Cyrus Ghassemi)
- Help: Outputting Angle (CMES) (Kevin Blackburn)
- Alignment Technique Problems (Jesse Gentile)
- WinCMES Input Channels (Mark Bailis)
- LK-DMIS Files (Jesse Gentile)
- Machine moves in circular motion sometimes (James McCafferty)
- New CMM orogramming book (Scott Beavers)
- Reverse Engineering software (Mark Simmonds)
- Problem with Datums and Patern (James McCafferty)
- Slot Measurement in CMES (Richard Guess)
- Slot ORIENTATION (James McCafferty)
- Zero Edge Point (James McCafferty)
- surface profile with in .0005 (Luis Cuevas)
- true position (Arthur Turney)
- PATERN (PATTERN) (James McCafferty)
- DMI v BTC File (Richard Nicholls)
- No Topic (Timothy Schroeder)
- Explain COMPOS:PATERN (James McCafferty)
- Curvic Coupling (Timothy Schroeder)
- Rotation and movment of prob head in CMES (kaveh zamani)
- CMES: Need help with INPUT (Kevin Blackburn)
- CMES INPUT- (Arie Tsur)
- SCALING of MODELS and PROGRAMS (Richard Mathis)
- feature size errors (James McCafferty)
- Best Fit Requirement (Bill Rogers)
- CMM Programming Instruction (Jesse Gentile)
- Mistake proofing a program... (Richard Criswell)
- Vector Point #2 in CMES Can I Do This in DMIS (Bill Ferri)
- Feature Vectors (James McCafferty)
- glitches on version 5.6, patch 1 of lk-dmis (William Endicott)
- Studio (Steve St. Pierre)
- need help (Jim Crowe)
- LK-DMIS 5.3 & CAMIO 5.3 (FRANK SVETEK)
- manual print button move points (Steve St. Pierre)
- CMM programming book (Scott Beavers)
- raw data from gcurve (Terry Phillips)
- Reset with in a program! (Arie Tsur)
- No Topic (Arie Tsur)
- Camio Reports (Charles Dawson)
- Another Camio Report Question (Charles Dawson)
- Sensor Calibration (Charles Dawson)
- LK 80 (Henry McLaughlin)
- True 3 d Position and point profile (SURINDER PARKASH)
- Output Out-of-Tolerance features only (Viktor Sokurov)
- Text Labels in CSV file (Viktor Sokurov)
- Problems with Dgigraph 5.6 (Jim Crowe)
- Probe wizard (Bill Rogers)
- Is this site current (Ken Elliott)
- New CMM magazine (Scott Beavers)
- SS,LA\n (Mark Bailis)
- Part Alignment Question (Jesse Gentile)
- Cylindrical Probe Setup help (Jesse Gentile)
- Comparing Dates in LK-DMIS (Doug Jimison)
- Writing To A Label Maker as a DEVICE (Bill Ferri)
- LK-DMIS to PC-DMIS (Bill Rogers)
- free software *.res files to *.csv files free !! (Andrew Email: rattysoft@yahoo.co.uk)
- Perpendicularity (Brian Wise)
- Verifying Points are Actually on CAD Surface (Richard Mathis)
- Camio / Compare database (chris mcdonald)
- Input serial number (Cyrus Ghassemi)
- camio reports (Terry Phillips)
- Decimal Places for Requalification (Dan Connelly)
- 10 CHARACTER LIMIT (Dan Connelly)
- Position floating (Dan Connelly)
- CSV FILES (James McCafferty)
- GE COMP (Richard Nicholls)
- Native Dmis? (Steve St. Pierre)
- GAUGE HEIGHT (Richard Nicholls)
- DRO WINDOW (Scott Scarpiello)
- Corrupt database (Randy Heine)
- .csv file (Richard Nicholls)
- Camio Studio Pros 'vs' Cons (James McCafferty)
- featue data access (Terry Phillips)
- Drag scanning. (Richard Nicholls)
- Visual BASIC w/LK DMIS (Jesse Gentile)
- reporting in camio 5.5 (SURINDER PARKASH)
- Dovetail Measurment In LK-DMIS (Kailash Pandhare)
- Need help with alignment (Viktor Sokurov)
- SP600 ans SP25M Probe (JAVID MALEK)
- Stay Away from Studio 4.0 (James McCafferty)
- Inserting Pictures (Jesse Gentile)
- Anyone using XML output from Studio 3? (John Foreman)
- How to apply MMC for Elongated Holes? (Viktor Sokurov)
- importing cad points (Terry Phillips)
- Probe Calibration (Terry Phillips)
- Studio 4.0 (Joel Campbell)
- Capture The Calibrated Probe Diameter (Bill Ferri)
- No Topic (Arie Tsur)
- Find the Max / Min Radius To a Datum Axis (Bill Ferri)
- WinCMES 5.3 - GI,WINEXEC (Mark Bailis)
- am i what youve been looking for ?? (Andrew Email: rattysoft@yahoo.co.uk)
- More WinCMES Stuff (Mark Bailis)
- defining a datum (Terry Phillips)
- MISC (William Studenka)
- data files (Terry Phillips)
- Scanning (Mark Bailis)
- How can I measure the wall thickness of a 90° arc (Bill Ferri)
- No Topic (Terry Phillips)
- Windows XP (Mark Bailis)
- WinCMES 32 bit & VB6 - Error Number 278 (Rick S)
- illegal touch! (Alex Baltazar)
- Camio Reporting (James McCafferty)
- Disabling touch trigger probes (Michael Simpson)
- Metrologic
- Misc.
- Mitutoyo
- Non contact measurement
- Origin
- Positions Wanted
- Renishaw
- Romer
- Sheffield