The CMM Forum

Users: The CMM Forum

CMM PROGRAMMER / INSPECTOR EXPERIENCE OF 17 YEAR IN MANUEL AND AUTO LK /MITUTOYO FROM 1984 LKWIN /PCDMIS /CAMIO /DIGIIGRAPH GEOPAK /COSMES EXPERIENCE QUALITY CONTROL /SPC /SUPPLIER

Ray Admire mailto:ray.admire@lmco.com http://home.comcast.net/~dmis/

I am the lead CMM Programmer for Lockheed Martin Missiles and Fire Control in Dallas, TX. We use Silma CimStation to program for two LK G-80's with rotary table and SCR-200 auto-changers.

Larry Allison lallison@raytheon.com

James Altmann CMM Programmer GKS Inspection Services / CEJ - Detroit (734) 953-9696

jra

Mark Bailis PCC Airfoils SMP 440-585-8221

Paul Banner Findlex Corporation Machining/Casting Quality

Hobbies: Auto racing, Hunting

dwayne banville electro-methods south windsor, connecticut

music/fishing/astronomy/woodworking 10years cnc machining & programming 20 years inspection

A. Barari Tel & Fax: +98(21) 2006605 Email: b7626929@cic.aku.ac.ir Internet: www.aku.ac.ir/barari

Kevin Blackburn(Quality Engineer) MAN B&W DIESEL LTD Stockport, ENGLAND

Making things out of metal, programming, sunshine, smiles, and happy people

jboisvert

I'm employeed as a CMM operator/programmer at JOY Mining Machinery in Australia. I run a Giddings & Lewis RS150 CMM

I first started using/programing CMM's in 1985 on a Sheffield DCC Horizontal Arm 1025 running the OFI/FLB software. In 1994 the machine was retrofitted with a Metromec Controller and DOS Capps was installed (Renishaw Scales replaced rotary encoders). In 1996 I went to work for AAT, the developers of Capps software as an App Eng., also did training, installation, testing & customer support. In 2000 took my current position as Quality Manager. Hobbies include fishing, hunting (archery), reading Tom Clancy novels.

Just promoted to Quality Supervisor. Have Zeiss Eclipse 550 ST running Usoft 9.03, c-90 controller. Always looking for good used equipment to suggest to our supplier base.

Dorothy Brown Quality Supervisor CME Mitsuba Corporation Mt. Pleasant,MI brown_d@cmecorp.com

My company manufactures automotive DC power motors, such as,wiper,starter, window,cooling fan,and sunroof. We have injection molding, metal cutting, metal stamping, armature assembly and finished product assembly. We are a Teir One,Two and Three supplier. We have a second plant in Indiana. Both plants have Zeiss Eclipse (c-99,ST,DCC) using Calypso 3.5 right now. We are members of Midwest Users group here in Michigan through Quality Tech, Inc. I have been working with CMM, metrology, layout for 4 years. I am the Quality Supervisor.

Program Zeiss CMM's from old style UMESS 300 to UMESS UX and Calypso as well as the ScanMax. Also use Silma and Holos for offline programming! Please contact me if I can be of assistance.

RAGURAAM.C

LISTENING MUSIC,STAMP COLLECTION, READING TECHNICAL MAGAZINES,ETC..

Monika Carlson Application Engineer Silma, Division of Adept Technology www.silma.com

ice skating, 3D graphics, computer, music

Iain Caville Measurement Solutions Ltd. England

Sue Clark Dynaplas Ltd.

Quality Engineer-CMM Programmer Lockheed Martin Missiles and Fire Control - Dallas P.O. Box 650003 M/S: L10-10 Dallas, Texas 75265-0003 email: mike.coleman@lmco.com

CMM Programmer at Lockheed Missles & Fire Control-Dallas.

New user converted from Vision to Mitutoyo Crysta 504 with GeoMeasure 6000, PH10T.

Bob Connors Lawrence Berkeley National Lab

We are located at Lawrence Berkeley National Lab in the hills above UC Berkeley and over looking San Francisco bay. Our primary work is to support high energy physics research at national labs in the US and around the world. None of our work is classified. Our shop has one 60x60x40 fanamation CMM that has been retrofitted with anorad linear motors, an omni-tech 5000c controller and uses Virtual Dmis as a front end. We use Silma Cimstation for off line programming and import models from Solid Designer or Pro/E. We also have a Faro arm and a 30x30x12 View noncontact video machine with laser scanning capability. Video Laser Holography is a new capability we have and can make form measurements down to 25 nanometers.

Best Regards, Joe Corrado

Web site construction. Flyfishing. Stage set construction.

baseball fan (braves) football fan (dolphins) hiking (Ga. & N.C.) mnt's.

Joshua A Farmer Engineering Technician/ Inspector Whirlpool Corporation/ Specialty Products Division, KitchenAid 1701 KitchenAid Way Greenville, Ohio 45331 Phone: (937) 548-4126 Ext. 6207 Fax: (937) 547-2850 Email:Josh_A_Farmer@email.whirlpool.com

GO BEARCATS! I'm intrested in moving toward an Engineering degree and obtaining as much knowledge as I can in the industrial relam.

Randy Flores Los Alamos National Labs ESA-WMM Inspection Team rflores@lanl.gov

Daniel Freifeld Visicon Inspection Technologies 870 H Napa Valley Coprorate Way Napa, CA 94558 www.visicontech.com dfreifeld@visicontech.com Tel: 707-259-1300 Fax: 707-259-1366

Jesse Gentile Quality Technician AMAK Brake, LLC

Ken Gibbs President - Quality Tech Inc. www.qualitytechinc.com

Founder and President of Quality Tech Inc. ISO 17025 certified Contract Inspection Company. Reverse Engineering services, prototype inspection, capability studies etc.. QTI was established in 1988. Offices in Flint, Sterling Heights, and Muskegon Michigan. Hobbies: Hunting, Fishing,Motorcycles <1998 Harley Heritage Softtail> Snowmobiling, Softball Coach, and Marshalling at swim meets for my 2 beautiful daughters. Former CMM instructor, and I truly love the CMM Industry.

Computer Aided Engineering Honours Graduate with 5 years CMM experience in 4 CMM softwares.

motorcycling

QUALITY SPECIALIST IN MNC / FORTUNE 500 COMPANY

regards Dave Gray Ford Motor Company